Skip to main content

INDUSTRIAL BALTUR BURNER - BT 100 DSNM-D 50HZ

Burners are devices used to mix fuel and air (or oxygen) to achieve controlled combustion while producing a specific flame and heat-release pattern. The heat generated is used to control the temperature within a combustion chamber to the process set points.

Manufacturer : Baltur Sp.A., Italy

  • Burner Model: BT 100 DSNM-D
  • Burner Operation : Two Stage (High/ Low Flame)
  • Fuel Adaptability : Furnace Oil ; Heavy Oil
  • Electrical Supply : 3N AC 50Hz 400V
  • Motor : 1.10 + 0.55 KW
  • Note : Equipped with air closure device


Technical Description

  • Extra heavy oil burner. Operation: two-stage
  • Regulating combustion air and blast-pipe.
  • Maintenance facilitated by the possibility of removing the combustion head without having to remove the burner from the boiler.
  • Sliding boiler coupling flange to adapt the blast-pipe to the various types of boilers.
  • Combustion air intake with butterfly valve. Air flow adjustment: electric servomotor
  • Fully closing air damper on shutdown to avoid loss of heat through the chimney.
  • Fuel supply circuit made of gear pump with pressure adjustment, shut-off valves and control flow valve
  • Electric fuel preheater with antigas valve, self-cleaning filter, thermometer, adjustment and minimum thermostats.
  • Atomisation unit with magnet to control the outlet/nozzle return pins.
  • Heating element for pump, valve and atomisation unit.
  • Flame detection by photoresistance.
  • Terminal board for the electric and thermostatic connections to the burner.
  • Terminal board for second stage operation.
  • Electric protection rating: IP40
Labels:

Comments

  1. Alan Curtis22 September 2020 at 04:39

    I want to share with you all here on how I get my loan from Mr Benjamin who help me with a loan of 400,000.00 Euro to improve my business, It was easy and swift when i apply for the loan when things was getting rough with my business Mr Benjamin grant me loan without delay. here is Mr Benjamin email/whatsapp contact: +1 989-394-3740, 247officedept@gmail.com / 

    ReplyDelete

Post a Comment

Popular posts from this blog

Industrial Gas Burners and their Spare Parts

G as  burner  is a device to generate a flame to heat up products using a gaseous fuel such as acetylene, natural gas or propane. Some  burners  have an air inlet to mix the fuel gas with air to make a complete combustion. Acetylene is commonly used in combination with oxygen. B urners  are devices used to mix fuel and air (or oxygen) to achieve controlled combustion while producing a specific flame and heat-release pattern. The heat generated is used to control the temperature within a combustion chamber to the process set points. Industrial Burner Spare Parts Siemens Sequence Controller Dungs Pressure Switch  Monarch Nozzles  Siemens Photo Cell  Siemens UV Cell
Post a Comment
Read more

BULK TEMPERATURE AND ITS SAFE WORKING IN THERMIC FLUID HEATER

Thermic Fluid Heater is most popular in almost every industry, and it is being used for various heating applications due to unique advantage over other heating systems like steam heating, electrical heating, direct firing, air heating etc. In many of the applications, it is very cost effective and energy saving as it has an exceptional advantage over other industrial heating methods. Thus, it is important to recognize various aspects of thermic fluid heating and significance of thermal oil temperature when thermic fluid circulate through tubes of heater. When fluid flowing inside the coils or tubes of the heater, it creates multiple layers of flow of the fluid along the tube periphery and this layer is almost stationery in a form of a film. This formation of film offers very high resistance to flow of heat from the heat source through heated metal surf...
Post a Comment
Read more

HIGH PRESSURE GAS TRAIN Components | Industrial Products

A Typical Fuel Train or High Pressure Gas Train has several components, each with a specific purpose which is briefly explained below: Manual shut-off valve (MSOV) – the purpose of this valve is to shut off the fuel  supply so that maintenance or replacement of the fuel train may be done. Gas pressure regulator (PRV) – its purpose is to maintain the fuel at a constant  pressure as recommended by the burner manufacturer. Gas Filter – the function is to prevent foreign particle and extraneous impurities  entering Gas Pressure Regulator. Low pressure gas switch – senses a low pressure in the range where the burner  cannot properly operate. This switch must be equipped with safety lock-out requiring manual reset. This tells the operator to check the gas pressure, since the burner will not try to restart until the switch is reset. Safety shut-off valve (SSOV) – the first of two valves in series that automatically  opens and shuts off the fuel supply to the burner...
1 comment
Read more