Skip to main content

Heatran Engineers-Leading Industrial Business in Engineering Products

 

17 years of Customer services for your industrial heating or Thermic Fluid Heaters, Thermal Oil Units, Heat Recovery, and Retrofitting and Equipment Modernization and Save Energy Schemes.

We, at Heatran Engineers are serving entire Industrial spectrum of our Industries by catering energy efficient and energy saving products by embracing the latest technologies and international techniques in sustainable manner. We take time to explore your needs and explain our options enabling to meet your requirements.

Custom built heating equipment, Thermic Fluid Heaters, Thermal Oil Units, Ring Main systems, Gas Trains, Hot Air Generators, Hot Water Boilers and heat exchanges etc are made to meet your requirements apart from standard sized products to address your process heat problem. These equipment are designed by highly experienced in such discipline and some of them are the last word to those solutions. Their vast experience and application oriented knowledge is our core strength and prime movers.

We design and construct appropriate equipment to meet your needs which is highly durable and energy efficient. Our in-house manufacturing processes are facility is make us to follow the right steps and controls to ensure quality products roll-out. We are also associated with some of the international technology companies in their appropriate fields to serve our customers for Industrial Heating Burners such as: Oil / Gas / Dual Fuel burners and non-standard, special fuels applications by General Bruciatori, Italy having wide range of burner capacity.

PRODUCTS & SERVICES

Oil / Gas / Dual Fuel Burnes

(Baltur S.p.A, Italy)

Pumps & Pumping Systems

(DAB Pumps S.p.A, Italy)

Thermic Fluid – Therminol – 55

(Solutia Inc., USA / Solutia Chemicals)

Boiler / Burner spares & accessories

Annual Maintenance Contracts.

Boiler Service Contracts

Training and Technical Services

Turnkey Projects

System Design & Consultancy

Consultancy on High Temperature Thermic Fluid Heating Systems

Trouble shooting and advice on problems of fired heaters.

Up-gradation, Retrofitting and fuel conversion in the heating systems.

Cleaning of choked Thermic Fluid / Boiler systems.

Retrofitting / Up-gradation of Air Heaters / Thermic Fluid Heaters /

Boilers / Heat Exchangers

Energy Conservation Systems.

Unit equipment – Custom Built.

Retrofitting with Oil / Gas / Dual Fuel burners


Comments

Popular posts from this blog

HIGH PRESSURE GAS TRAIN Components | Industrial Products

A Typical Fuel Train or High Pressure Gas Train has several components, each with a specific purpose which is briefly explained below: Manual shut-off valve (MSOV) – the purpose of this valve is to shut off the fuel  supply so that maintenance or replacement of the fuel train may be done. Gas pressure regulator (PRV) – its purpose is to maintain the fuel at a constant  pressure as recommended by the burner manufacturer. Gas Filter – the function is to prevent foreign particle and extraneous impurities  entering Gas Pressure Regulator. Low pressure gas switch – senses a low pressure in the range where the burner  cannot properly operate. This switch must be equipped with safety lock-out requiring manual reset. This tells the operator to check the gas pressure, since the burner will not try to restart until the switch is reset. Safety shut-off valve (SSOV) – the first of two valves in series that automatically  opens and shuts off the fuel supply to the burner. On burners above 1200

Bulk Temperature And Film Temperature In Thermic Fluid Heating

Thermic fluid heaters and its working temperature is always a perplexing term and it is also mostly misunderstood expressions. Generally, all thermic fluid manufacturers recommend certain economic operating temperature or optimum fluid bulk temperature based on its useful life of the product. Hence, the manufacturer of Thermic Fluid Heaters recommends a continuous operating temperature of 300 °  degrees Centigrade for such a heater in their expectations or estimation of temperature profiles. But it is important to understand various aspects of temperature when thermic fluid flows through tubes of heater. When fluid flowing in the coils or tubes of the heater, a very thin layer of the fluid all along the metal periphery vehemently adheres to the solid metal very strongly. This layer never moves and form a film or layer which is a stationary oil film. This film creates very high resistance to heat flow from outer heated metal surface to circulating thermic fluid. This resistance depends

INDUSTRIAL BURNER-BGN 510 ME V O2 50HZ

Baltur Industrial Burners Weight :-  287 kg Kilowatt :- 5001-10000 Kw Industrial Burner-Technical Descriptions:  Gas burner compliant with European standard EN676. Electronic operation at two progressive stages. Continuous modulation operation by installing P.I.D. controller in the control panel (to be ordered separately with modulation probe). Modulation ratio 1:8. Gas burner with low NOx and CO emissions in accordance with European standard EN676: class 2. Regulating combustion air and blast-pipe. Combustion air intake with throttle damper. Air flow adjustment with electric servomotor. Fully closing air damper on shutdown to avoid loss of heat through the chimney. Maintenance facilitated by the possibility of removing the combustion head without having to remove the burner from the boiler. Sliding boiler coupling flange to adapt the blast-pipe to the various types of boilers. Easy maintenance thanks to the two-sides hinge which allows the removal of the combustion head without having