Skip to main content

Industrial Products from Heatran Engineers & Tepskart E-commerce Platform

Heatran Engineers are serving entire Industrial spectrum of Industries by catering energy efficient and energy saving products & by embracing the latest technologies and international techniques in sustainable manner.

Heatran Engineers design and construct appropriate equipment to meet the needs of customers, which is highly durable and energy efficient. Their in-house manufacturing processes are the facility which is make them to follow the right steps and controls to ensure quality products roll-out.

They are associated with Eastman Chemical Co., USA / Mumbai for Synthetic Thermic Fluids-Therminol and Dealers of Baltur Burners under the group of Nirmal Energy Limited, Ahmedabad.

Industrial Products & Services by Heatran Engineers

Tepskart is an initiative of Heatran Engineers, Ahmedabad having 20 years of experience in Industrial Heating field. They cater to the entire spectrum of industries for industrial heating related to Thermic Fluid Heaters, Thermal Oil Units, Heat Recovery, and Retrofitting and Equipment Modernization and Save Energy Schemes.

Tepskart is an Online-to-Offline (O2O) platform aimed at serving Industrial customers for their technological, engineering products and services required. This is a unique platform to bring industrial customer to digital experience with brick and mortar stores. It enhances the buying experience on digital platform and product availing local stores and technical support at your door steps.

Comments

Popular posts from this blog

HIGH PRESSURE GAS TRAIN Components | Industrial Products

A Typical Fuel Train or High Pressure Gas Train has several components, each with a specific purpose which is briefly explained below: Manual shut-off valve (MSOV) – the purpose of this valve is to shut off the fuel  supply so that maintenance or replacement of the fuel train may be done. Gas pressure regulator (PRV) – its purpose is to maintain the fuel at a constant  pressure as recommended by the burner manufacturer. Gas Filter – the function is to prevent foreign particle and extraneous impurities  entering Gas Pressure Regulator. Low pressure gas switch – senses a low pressure in the range where the burner  cannot properly operate. This switch must be equipped with safety lock-out requiring manual reset. This tells the operator to check the gas pressure, since the burner will not try to restart until the switch is reset. Safety shut-off valve (SSOV) – the first of two valves in series that automatically  opens and shuts off the fuel supply to the burner. On burners above 1200

Bulk Temperature And Film Temperature In Thermic Fluid Heating

Thermic fluid heaters and its working temperature is always a perplexing term and it is also mostly misunderstood expressions. Generally, all thermic fluid manufacturers recommend certain economic operating temperature or optimum fluid bulk temperature based on its useful life of the product. Hence, the manufacturer of Thermic Fluid Heaters recommends a continuous operating temperature of 300 °  degrees Centigrade for such a heater in their expectations or estimation of temperature profiles. But it is important to understand various aspects of temperature when thermic fluid flows through tubes of heater. When fluid flowing in the coils or tubes of the heater, a very thin layer of the fluid all along the metal periphery vehemently adheres to the solid metal very strongly. This layer never moves and form a film or layer which is a stationary oil film. This film creates very high resistance to heat flow from outer heated metal surface to circulating thermic fluid. This resistance depends

INDUSTRIAL BURNER-BGN 510 ME V O2 50HZ

Baltur Industrial Burners Weight :-  287 kg Kilowatt :- 5001-10000 Kw Industrial Burner-Technical Descriptions:  Gas burner compliant with European standard EN676. Electronic operation at two progressive stages. Continuous modulation operation by installing P.I.D. controller in the control panel (to be ordered separately with modulation probe). Modulation ratio 1:8. Gas burner with low NOx and CO emissions in accordance with European standard EN676: class 2. Regulating combustion air and blast-pipe. Combustion air intake with throttle damper. Air flow adjustment with electric servomotor. Fully closing air damper on shutdown to avoid loss of heat through the chimney. Maintenance facilitated by the possibility of removing the combustion head without having to remove the burner from the boiler. Sliding boiler coupling flange to adapt the blast-pipe to the various types of boilers. Easy maintenance thanks to the two-sides hinge which allows the removal of the combustion head without having