Skip to main content

All about Industrial Pumps & others


Industrial Pumps


pump is a device that moves fluids (liquids or gases), or sometimes slurries, by mechanical action, typically converted from electrical energy into Hydraulic energy. Pumps can be classified into three major groups according to the method they use to move the fluid: direct lift, displacement, and gravity pumps.

Industrial pumps are used to move fluid in an industrial application. These pumps use a rotating impeller to accelerate a fluid and increase its pressure. There are dozens of industrial centrifugal pumps including slurry pumps, chopper pumps, sewage pumps, vertical turbine pumps, axial flow pumps and more.

Water pumps are machines for moving water, they play a fundamental part in agriculture as they move water from its source to the fields and crops. Water pumps can be used with many forms of irrigation, such as drip, sprinklers or with a hose.

  • Types of Pumps

  1. Centrifugal Pumps

  2. Vertical Centrifugal Pumps

  3. Horizontal Centrifugal Pumps

  4. Submersible Pumps

  5. Fire Hydrant Systems

  6. Diaphragm Pumps

  7. Gear Pumps

Industrial Pumps

  • Applications of Pump
  1. Pumping Water from one place to another place
  2. Aquarium and pond filtering
  3. Used for Water cooling and fuel injection in automobiles
  4. Pumping oil or gas and operating cooling towers in the energy industry
  5. Uses in waste-water recycling, pulp, and paper, chemical industry, etc

Nirmal Energy Limited, as an Authorized distributor of GRUNDFOS (Since 1998), offers wide range of quality pumps for various applications like Boiler Feed, RO Plant, DM Plants, Heating and Hot Water Service Systems, Cooling and Air Condition Systems, Various Industrial Applications, Ground Water Supply, Sewage and Waste Water Applications, Environmental Applications and Hydro Pneumatic Pressure Boosting Systems for Hospitals, Hotels, Industries, Institutions and High Rise Buildings / Bungalows.

Nirmal Energy Limited provide different types of pumps
  • Domestic Pumps
  • Industrial Pumps
  • HVAC Pumps
  • Pressure Pumps/ Booster Systems
  • Waste Water Pumps
Discover the wide range of Industrial & Domestic Pumps from Nirmal Energy Limited
Industrial PumpsIndustrial Pumps

For Inquiry Contact: +91 9825804924

Comments

Popular posts from this blog

HIGH PRESSURE GAS TRAIN Components | Industrial Products

A Typical Fuel Train or High Pressure Gas Train has several components, each with a specific purpose which is briefly explained below: Manual shut-off valve (MSOV) – the purpose of this valve is to shut off the fuel  supply so that maintenance or replacement of the fuel train may be done. Gas pressure regulator (PRV) – its purpose is to maintain the fuel at a constant  pressure as recommended by the burner manufacturer. Gas Filter – the function is to prevent foreign particle and extraneous impurities  entering Gas Pressure Regulator. Low pressure gas switch – senses a low pressure in the range where the burner  cannot properly operate. This switch must be equipped with safety lock-out requiring manual reset. This tells the operator to check the gas pressure, since the burner will not try to restart until the switch is reset. Safety shut-off valve (SSOV) – the first of two valves in series that automatically  opens and shuts off the fuel supply to the burner. On burners above 1200

Bulk Temperature And Film Temperature In Thermic Fluid Heating

Thermic fluid heaters and its working temperature is always a perplexing term and it is also mostly misunderstood expressions. Generally, all thermic fluid manufacturers recommend certain economic operating temperature or optimum fluid bulk temperature based on its useful life of the product. Hence, the manufacturer of Thermic Fluid Heaters recommends a continuous operating temperature of 300 °  degrees Centigrade for such a heater in their expectations or estimation of temperature profiles. But it is important to understand various aspects of temperature when thermic fluid flows through tubes of heater. When fluid flowing in the coils or tubes of the heater, a very thin layer of the fluid all along the metal periphery vehemently adheres to the solid metal very strongly. This layer never moves and form a film or layer which is a stationary oil film. This film creates very high resistance to heat flow from outer heated metal surface to circulating thermic fluid. This resistance depends

INDUSTRIAL BURNER-BGN 510 ME V O2 50HZ

Baltur Industrial Burners Weight :-  287 kg Kilowatt :- 5001-10000 Kw Industrial Burner-Technical Descriptions:  Gas burner compliant with European standard EN676. Electronic operation at two progressive stages. Continuous modulation operation by installing P.I.D. controller in the control panel (to be ordered separately with modulation probe). Modulation ratio 1:8. Gas burner with low NOx and CO emissions in accordance with European standard EN676: class 2. Regulating combustion air and blast-pipe. Combustion air intake with throttle damper. Air flow adjustment with electric servomotor. Fully closing air damper on shutdown to avoid loss of heat through the chimney. Maintenance facilitated by the possibility of removing the combustion head without having to remove the burner from the boiler. Sliding boiler coupling flange to adapt the blast-pipe to the various types of boilers. Easy maintenance thanks to the two-sides hinge which allows the removal of the combustion head without having